Electrical Installations Safety

Electrical Installations Safety

METREL Multifunction Electrical Safety Testers are well known for their quality and utility at affordable prices

EUROTEST new generation of digital testers designed for the installer/contractor market

Some of the key features of Multifunction Testers are:

  • Insulation resistance,
  • PE conductor continuity test,
  • Line and Loop resistances with Fuse evaluation table built-in,
  • RCD test with Trip lock function,
  • phase sequence in 3-phase systems,
  • on-line voltage monitor,
  • 2-wire and 3-wire Earth resistance test with built-in battery operated generator,
  • earth resistance test with Two Clamps method,
  • Leakage Current test,
  • test of Luminance with optional LUX meter probe

MI 3108 Eurotest PV

MI 3108 Eurotest PV

 

MI 3108 Eurotest PV is a combined photovoltaic tester and electrical installations safety tester. It enables complete testing of electrical installations according to EN 61557 standards and in addition performs all necessary tests required on single-phase photovoltaic (PV) installations. This includes all of the tests as required by EN 62446, but also includes I – U characteristic, Calculation of STC values and power measurements on Inverter’s DC and AC sides. The unit is designed for the demanding working conditions (up to 1000 V, with 15 A DC). To greatly improve user safety the MI 3108 EurotestPV comes with the PV Safety Probe which ensures safe disconnection every time.

Datasheet

MI 3109 Eurotest PV Lite

MI 3109 Eurotest PV Lite

 

MI 3109 Eurotest PV Lite is a photovoltaic (PV) tester. It performs all necessary tests required on photovoltaic installations. This includes all of the tests as required by EN62446, but also includes I – U characteristic measurements, calculation to STC values and power measurements on Inverter’s DC and AC sides (single-phase only). MI 3109 EurotestPV Lite is optimized for PV tests therefore the Autotest operation mode is implemented which is intended to perform a complete set of test needed for verification of PV installations according to EN 62446 with pressing off only one button. With optional accessories the same PV test functionality as with MI 3108 EurotestPV is available.

Datasheet

MI 3105 Eurotest XA

MI 3105 Eurotest XA

The fifth generation of Metrel multifunction electrical Installation testers brought know-how in the testing procedures to reality. Because of the need to be efficient, faster and competitive but still responsible and concentrated on safety, all the technical content and innovations under AUTO SEQUENCE ®, rotate around taking care about testing procedures itself.

Datasheet

MI 3101 Eurotest AT


MI 3101 Eurotest AT

 

EurotestAT is automated robust and lightweight electrical installation tester. Experts from the field, maintenance people, inspectors and specialists help us ascend and descend the slopes with design and efficiency. The designing concepts of practicality and easiness of use reflect in the new feature named AUTO SEQUENCE ®, which the EurotestAT is based on.

Datasheet

MI 3102H BT Eurotest XE 2.5 kV new


MI 3102H BT Eurotest XE 2.5 kV new

 

MI 3102H BT Eurotest XE 2,5 kV is a multifunctional measuring instrument which apart from all the necessary functions for complete installation safety testing according to IEC/EN 61557 performs insulation resistance measurement with the test voltage up to 2,5 kV (measuring range is up to 20 GΩ) and enables diagnostic test by PI and DAR indexes calculation. Besides, the MI 3102H BT EurotestXE 2,5 kV enables on-line voltage monitoring, phase sequence testing, earth resistance measurement, ill luminance measurement and TRMS current measurement. EurotestXE 2,5 kV is equipped with integrated characteristics of fuses and RCDs for PASS / FAIL evaluation of test results. All the results can be quickly saved and referenced on the instrument and then downloaded via the EuroLink PRO software (included in the standard set) to the computer for evaluation and report generation after testing.

Datasheet

MI 3100 SE Eurotest EASI new

MI 3100 SE Eurotest EASI new

 

MI 3100 SE Eurotest EASI is a fast, accurate and easy to use multifunctional measuring instrument which performs a complete set of installation safety tests according to IEC/EN 61557. Besides, the MI 3100 SE EurotestEASI enables on-line voltage monitoring, phase sequence testing and earth resistance measurement. EurotestEASI is equipped with integrated characteristics of fuses and RCDs for PASS / FAIL evaluation of test results. All the results can be quickly saved and referenced on the instrument and then downloaded via the EuroLink PRO software (included in the standard set) to the computer for evaluation and report generation after testing.

Datasheet

MI 3100 S Eurotest EASI new


MI 3100 S Eurotest EASI new

 

MI 3100 s Eurotest EASI is a fast, accurate and easy to use multifunctional measuring instrument which performs a basic set of installation safety tests according to IEC/EN 61557. Besides, the MI 3100 s EurotestEASI enables on-line voltage monitoring, phase sequence testing and earth resistance measurement. EurotestEASI is equipped with integrated characteristics of fuses and RCDs for PASS / FAIL evaluation of test results.

Datasheet

MI 3110 Eurotest IM new


MI 3110 Eurotest IM new

 

The MI 3110 EurotestIM is a perfect tool for testing permanent Integrated or mobile IT Earthing Systems with Low Voltage Electrical Installation’s Power Supply from Generator or Transformer.

Datasheet

MI 3125 BT Eurotest COMBO new


MI 3125 BT Eurotest COMBO new

MI 3125 BT Eurotest COMBO is the ideal instrument for engineers who perform high volume testing or work regularly on TT and TN systems. Containing all necessary tests for installation safety testing, MI 3125 BT offers the brand new ability to test B-type (DC sensitive) RCDs. EurotestCOMBO contains integrated characteristics of fuses and RCDs (including B type) for the evaluation of line / loop impedance results. The bright graphic display with backlight ensures that results, indications, measurement parameters and messages are clear, visible and easy to read. The red and green LEDs on either side of the display provide a clear PASS / FAIL evaluation of test results. Each test has its own individual help screen describing how to connect the instrument into the installation and how to perform a measurement. All the results can be quickly saved and referenced on the instrument and then downloaded via the EuroLink PRO software, included in the standard set, to the computer for evaluation and report generation after testing.

Datasheet

MI 3125 Eurotest COMBO


MI 3125 Eurotest COMBO

 

The MI 3125 is a multifunctional installation safety tester which is distinguished by lightweight design and usability. Integrated characteristics of fuses and RCDs, help screens, red and green LEDs for PASS / FAIL evaluation of test results online voltage monitor make the MI 3125 ideally suited for fast and easy testing of electrical installations.

Datasheet

MI 2086 Eurotest 61557


MI 2086 Eurotest 61557

Advanced, multifunctional digital measuring instrument for low voltage electrical installation safety testing in accordance with IEC / EN 61557.

Datasheet

MI 2093 Line Tracer


MI 2093 Line Tracer

 

Field proven instrument for under-wall low voltage installation tracing, fuse finding, short-circuit spot determination and metal installation tracing. Accurate fuse locating.

Datasheet